Loud Pipes for 2007 Harley XL1200c?

6 Comments

1. hammer says:

   June 27, 2009 at 1:03 pm

   http://www.vanceandhines.com

   Consider the straight shot ,slip ons. They can be run with or w/o baffles.
   When new exhaust having reduced back pressure are installed on any bike, re-jetting or re-mapping is usually needed.
   You can always change out the pipes, do a few test runs and check the spark plugs to see if the fuel/air ratio is O.K. and if not re-map.
   I'd plan on doing the re-map,it's pretty rare that it's not necessary.
2. randall flag says:

   June 27, 2009 at 1:03 pm

   sorry but you will have to tune the motor after installing new pipes…Reinhardt's sound great
3. todd_painter2001 says:

   June 27, 2009 at 1:03 pm

   i have an '86 883C i have Screaming Eagle pipes on mine & i think it sounds good but remeber you will need to have it remapped
4. ramarro smith shadow says:

   June 27, 2009 at 1:03 pm

   Harley did the EPA catalytic converter thing as of 2007 and to change exhaust has become a major problem as the computer does not want to allow it. It must have serious engine adjustment changes to make high flow pipes work. You need to do some research and really talk with some dedicated Harley guys ( I am sure they have found some way around this). As to Pipe manufactures many I know use Vance and Hines which are excellent after-market pipes ( I have them on my bike).
5. joe j says:

   June 27, 2009 at 1:03 pm

   Check out http://www.autopartauctions.com
6. Jason J says:

   June 27, 2009 at 1:03 pm

   ok you want more noise put some pipes on……. k now you have to have more fuel into the more air moving, right, now you have to open the air can or youll burn to lean, k get yourself some rineharts they sound and perform great, get the air cleaner kit from screaming eagle, and get the race tuner. you might have to spend a little more money but your bike will be right. harley doesnt offer any performance pipes worth a damn right now so go aftermarket. good luck